IWS

Stereo Balanced In-Wall Pre-amp New

IWS_01
IWS_02IWS_03

-40%

IWS  Stereo Balanced In-Wall Pre-amp

Earthquake’s new IWS Stereo Balanced In-Wall Pre-amp packs flexibility, power, and control all into one small and very discrete package.

In The Box:

1 x IWS In-Wall Pre-amp

Compare item

67.50
40.83

Sold per piece

EAN: 0689759001843 Excluding VAT 32.66 €

The IWS was designed to receive an input signal from the front panel 3.5mm line input and send it to the BTA-250 (sold separately) for amplification via a CAT5/6 cable. Through the use of a Cat 5/6 cable, the IWS will utilize Earthquake’s HVBT (High Voltage Balanced Transport™) to send power and signal over Ethernet making the BTA-250 virtually immune to input signal noise.

The IWS can be powered by a CP2425 12–24VDC power supply (sold separately) that can either be plugged into the front panel or hard wired to the phoenix connector on the back of the unit. Designed to fit into most standard single-gang junction boxes, the IWS can be easily installed into any new or pre-existing constructions (homes, bars, restaurants, garages, hotel rooms, etc.). It will make listening to your favorite music or movies in any room possible.

Note: Earthquake uses a proprietary CAT 5/6 port configuration and is available upon request.

Box dimensions
14 × 14 × 16 cm
Weight
0.735 kg

Specifications

Input Connections
3.5mm Stereo Line In
Output Power
4 Volts Balanced
Power Input
12–24VDC
Power Range
12–24VDC
Signal to Noise Ratio
105dBA

Dimensions

Height
115 mm
Width
70 mm
Mounting Depth
44.45 mm
  • 2-Channel Balanced Output Pre-amp
  • Cat 5/6 PoE + Signal
  • Easy Installation
  • High Voltage Balanced Transport™
  • Multi-Room Solution
  • Up to 200ft (61m) Noise-Free Audio
  • Works with Earthquake BTA-250 In-Wall Amplifier

Manual