Earthquake’s DJ-Quake series was known as a revolutionary, portable line array system with performance that matched perfectly for bars, restaurants, DJs, houses of worship, and most other medium sized venues.
The DJ-Quake-Arrays Gen2 further builds off of the well-known success of the DJ-Quake series now with the internal wiring built right into the mounting bracket.
It features a user-friendly male and female contact terminals that will make setup and breakdown super easy for any skill level.
The DJ-Array Gen2 packs serious punch that is capable of dispersing optimized sound over long distances thanks to its advanced array design. Medium to large indoor venues will have clear punchy sound all the way to the back of the room.
It was designed to be foolproof with no compromise in performance with versatility in mind. The new DJ-Array Gen2 is an excellent solution for virtually any situation where sound reinforcement is needed.
Whether used in a portable on-the-go system or permanent audio fixture, the new Earthquake DJ-Array Gen2 is a go-to solution for DJ's, musicians, and pro audio professionals.
Note: Before you assemble the DJ-Array Gen2, make sure you match box components L to A and R to B.
The Array speaker is comprised of 4 modules with each having an individual resistance of 16 ohms and a 50 watt power-handling. They operate in parallel where they present a 4 ohm load to the amplifier. At 4 ohm the total speaker can handle 200 watt. It's important to note that if volume max is defined by a voltage limiter, that the max voltage is not set above 28 volts. Since the speakers operate in parallel the max voltage limit is unchanged whether one or all 4 are driven. Intended Use: