CONDITION: Like new. Small Scratches on enclosure
The standard A/V receiver output is 600Ω yet most ground loop isolators on the market today have 200Ω at best. When using these substandard products, your A/V receiver has to deliver 3X more current and or compromise the output level. The new ISO-200 comes with an impedance of 600Ω right out of the box matching that of the industry standard. Unlike other products on the market, Earthquake’s ISO-200 is constructed with high-quality components and will not roll-off the low frequency response due to undersized transformers resulting in substandard performance. It was designed to kill off the dreaded buzz noise or ground loop while maintaining high-quality sound from your audio system.
The ISO-200 is unique because it not only serves as a ground loop isolator, but it is also a 2-way signal converter. It will convert an unbalanced consumer level RCA signal to a balanced professional level XLR signal and vice versa. The compact and rugged construction of the ISO-200 allows for it to fit into virtually any audio system, and can be mounted to any surface with its built-in mounting bracket. This will give you a cleaner looking install and allow it to be hidden out of sight. When it comes to audio noise and hum issues, Earthquake Sound offers great problem solving solutions for audio professionals and installers to the everyday home and car audio enthusiast.
For long wire runs, Earthquake strongly suggests using the HUM KLEANER.
The new Hum Kleaner is designed to eliminate Hum at the source while also amplifying the purified signal so that it may be pushed over long wire runs. In addition to eliminating common hum issues, it is equally important that your amplifier receives the required signal voltage to maximize available performance.
If your powered equipment is not receiving the required signal voltage then it is impossible to perform at the level that the manufacturer intended. That is why the engineers at Earthquake Sound decided to integrate a pre-amplifier into the Hum Kleaner’s noise-suppression- circuitry. This device is not just a line converter, on-board is an amplifier capable of boosting a signal to 9V (RCA) or 18V (TRS/XLR).
The Hum Kleaner provides two channels of unbalanced-to-balanced level conversion and two channels of balanced-to-unbalanced conversions in a resilient, compact, and portable unit. The Hum Kleaner can be a valuable tool in application areas such as home, professional recording studios, live sound, PA, DJ, AV or anywhere else where signals need to be pushed long distances while retaining clarity. It also works with mixers, audio, processors, laptop computers, CD/DVD players, gaming consoles, powered monitors, and digital workstations.