-40%
The Luminous-1000 will fit most of the old MKV cabinets and can be installed without modifying the cabinet.
Make sure to check the dimensions of the plateamp in your old subwoofer and compare them to the dimensions of the Luminous-1000.
Note: In case the cabinet is Piano finish, the corner must be rounder on the metal plate by about 1 or 2 mm and then touch up the black paint.
Earthquake’s ODL is an LED/LDR circuit that converts an analog audio signal to light and optically couples it to the driver stage. This prevents the amplifier from clipping when the gain is set too high which limits the distortion to near nil levels and maximizes performance of the Supernova Luminous.
The use of a fully balanced XLR input can be used in cases when the distance between the Supernova Luminous and the audio source is excessive and susceptible to noise interference. Use the selector switch between the RCA and XLR inputs to select the desired input method.
A 4th order 24dB/Octave variable crossover filter from 50–150Hz is designed to control the subwoofer’s cutoff frequency. the general recommended setting is in the 2 o’clock position.
A 0º–180º phase switch allows users to synchronize the subwoofer to obtain a better and more precise bass response
This feature allows the user to power on the Supernova Luminous from your home A/V receiver. When the A/V receiver is turned on, a 12V signal is sent to the subwoofer and will power on while the power switch is on the off position.